- Contact Person : Ms. Liu Flora
- Company Name : Smart-Tech Automation Equipment Co., Limited
- Tel : 86-755-83892046
- Fax : 86-755-83891676
- Address : Guangdong,SHENZHEN,Rm D15, 5th fl.,No.213 Qianjin Yi Lu, 25th Zone, Baoan, Shenzhen, P.R.C.
- Country/Region : China
- Zip : 518101
SUNX CO2 Laser Marker LP-400
Adopting a high-speed galvanoscanner and the advanced technology necessary to realize high-speed marking makes it possible to mark on products that are moving rapidly. The LP-430 that can mark 700 characters per second reduces tact time, leading to more than twice the productivity of previous models. |
Stability of laser outputWith a laser output stability of within ± 3 % (typ.)*, 10.6 μm 0.417 mil wavelength models work well in applications ranging from marking thin films and other tricky substrates to processing tasks such as removing insulation from cables. |
Clear markingWell-matched to the heat absorption characteristics of plastics, the 9.3 μm 0.366 mil wavelength laser allows marking on plastic surfaces by melting the surface layer without creating excessively deep marking and limiting damage to the substrate. This capability rectifies issues with the previous models where deep marking would create pinholes or otherwise make marking output difficult to read. |
High-quality processingShort-wavelength laser radiation is readily absorbed by plastics, allowing the creation of sharp edges and increasing dimensional accuracy
RSS (GS1 DataBar) code supportThe LP-400 series supports RSS (GS1 DataBar) and Composite codes, allowing product codes and other information to be output in a space-efficient manner on small medical products such as ampoules and vials. Both normal and reversed (white on a black background) marking modes are supported.
Freedom of installationSpace-saving design (tower head models)At 175 x 230 mm 6.9 x 9.1 in, the tower head is smaller than a B5 sheet of paper. Tower head models require less space for installation and can be integrated into existing production line space. |
Rotating head design (standard models)A unique head design that rotates freely through 350° allows the laser marker to be installed even in a vertical orientation. Flexible installation options make it easy to fit the system into a variety of production environments.
A full line-upA full line-up meets the needs of diversified production lines. Two types of laser wavelengths are available for tower head models and standard models. In addition, it is possible to select areas of 55 x 55 mm 2.2 x 2.2 in to 160 x 160 mm 6.3 x 6.3 in due to the three types of marking areas.
Easily set by using a computer with the "Laser Marker NAVI" softwareThe LP-400 series come standard with application software for easily configuring print data. Marking layout can be easily performed as desired with intuitive and simple mouse operations. Moreover, batch control of multiple laser markers is possible using one computer. This significantly contributes to increased work efficiency. |
Laser Marker NAVI included softwares
Extraordinarily easy to use color LCD equipped console [LP-ADP40 (optional)]A color touch panel designed for maximum ease of use and viewing provides stress-free operation by displaying marking data and settings immediately. |
The LP-400 series laser markers can be operated using a commercially-available monitor and mouse instead of console as equipped with the VGA connector and mouse connector.
Convenient features meet a variety of needsUSB connectorsThe ability to store system settings on standard USB memory sticks lets you backup marking settings or copy the same set of settings to multiple laser markers, delivering improved ease of use compared to the floppy disk drive used by previous models.(The system also supports USB-connected floppy disk drives.)* Customers are encouraged to verify proper operation of system components in advance when using off-the-shelf hardware. |
SUNX CO2 Laser Marker LP-400
